RAAJCORED-81 W

An all position rutile type flux cored wire for MAG/MIG welding.

CLASSIFICATION          : AWS/SFA-5.29: E81T1-W2
                                           JIS YFA-C58W

CHARACTERISTICS     : Flux-cored welding wire designed to produce weld metal that matches the corrosion resistance the coloring of the ASTM weathering-type structural steels. These special properties are achieved by the addition of about 0.5 % Copper to weld metal. To meet strength, ductility and notch toughness in the weld metal.

APLICATION               : Suitable are used to weld typical weathering steel, such as ASTM A 242 and A 588 and weather proof steel for structures, buildings, vehicles and bridges.

SHIELDING GAS           : Welding with CO2 gas and Ar+ CO2 gas mixture.

CHEMICAL COMPOSITION % ( Weld wire chemistry under CO2 Gas)

C	Mn	Si	Cr	Ni	Cu	S&P
0.02-0.06	1.00-1.50	0.35-0.70	0.45-0.70	0.40-0.80	0.30-0.75	0.030 Max

ALL WELD MECHANICAL PROPERTIES FOR MIG ( under CO2 GAS )

YS (N/mm²)	UTS (N/mm²)	EL %	CHARPY “V” NOTCH IMPACT AT
550-620	620-680	24-32	-30°C : 60-100 J

DIMENSION, CURRENT CONDITION & PACKING DATA

Size(mm)	Size(inch)	Current Condition(DC+)	Voltage (V)	Gas Flow Rate L/min.	Spool packing 12.5 kg.	Spool packing 15 kg	Drum packing 100/200kg
1.20	5/ 64”	120-300	24-34	15-25
1.40	1/ 18”	130-330	26-34	15-25
1.60	1/ 16”	150-350	28-36	15-30

Raajratna offer a wide range of Flux-cored welding wires for MIG welding.

Customer packing on request.