RAAJSAW-1 (AWS A 5.17 EL8)

Copper Coated Continuous Solid Mild Steel Wire for SA Welding

Classification:

AWS : SFA/A 5.17 EL8
DIN : 8557 S2

Characteristics:

Copper-coated mild steel solid wire designed for welding mild and medium carbon structural steels, as well as unalloyed steels, in combination with agglomerated SAW flux. Provides smooth welding performance and stable arc characteristics for continuous welding applications.

Applications:

Continuous welding of mild steels and low carbon structural steels
Suitable for general structural and fabrication applications

CHEMICAL COMPOSITION % (Solid Wire Chemistry)
C	Mn	Si	S	P	Cu
0.10 Max	0.25-0.60	0.07 Max.	0.030 Max	0.030 Max	0.35 Max

ALL WELD METAL CHEMICAL COMPOSITION (Typical %)
UNDER Fluxes	C	Mn	Si	S	P
Raajmelt-1	0.085	1.10	0.55	0.016	0.020
Raajmelt-2	0.095	1.20	0.45	0.015	0.018

ALL WELD METAL MECHANICAL PROPERTIES (Typical)
UNDER Fluxes	YS (N/mm²)	UTS (N/mm²)	EL %	CHARPY “V” NOTCH IMPACT @ 0°C	CHARPY “V” NOTCH IMPACT @ -20°C
Raajmelt-1	450	530	28	60 J	—
Raajmelt-2	460	555	26	80 J	60 J

DIMENSION, CURRENT CONDITION & RECOMMENDED PARAMETERS
Size (mm)	Size (inch)	Current Condition Amps (DC+)	Voltage (V)	Electrodes Extension	Travel Speed (mm/sec ±0.5)
2.0	5/64”	300-400	26-29	13-19	5.5
2.4/2.5	3/32”	350-450	27-30	19-32	6.0
3.2	1/8”	425-525	27-30	25-38	6.5
4.0	5/32”	475-575	27-30	25-38	7.0

Raajratna offers a wide range of copper-coated welding wires for MIG/TIG/SA welding.

Packing Specification: Normally supplied in spool form (On MS former)

MS bobbin DIN-630: Approx. 250 kgs.
Drum Pack: Approx. 600 kgs.
Inner diameter: 300 mm
Width: 100 mm
Weight: 25 Kgs

RAAJSAW-1 (AWS A 5.17 EL8)

Copper Coated Continuous Solid Mild Steel Wire for SA Welding

Classification:

Characteristics:

Applications:

One Stop Solution for all Kind of Welding Consumbales Requirments